3239110-Hochdruck-Einhandpresse.jpg

 

3239211
Manometerbereik
0 - 400 bar
Gewicht (kg) 1.960
capaciteit cilinder (cm³)
400/500
Lengte cilinder (mm)
300
Diameter extern cilinder (mm)
58
Vullen met vetcartouche
400 gr DIN 1284
JA
Vullen met vulpomp
JA / 500 gr
Min./Max temperatuur (°C)
10 / 40
Werkdruk [bar]
300
Maximum druk [bar] 400
geleverde hoeveelheid
per slag (cm³)
0.3
Koppeling (smeermiddel) Binnendraad P
G 1/8 "
Koppeling (blaasmond) Binnendraad E
M8 X 1
Koppeling manometer Binnendraad M
G 1/4 "
specificatie smeermiddel NLGI 3/Max 5000 mPa.S






High Pressure One-hand pump with >Gauge is used for clamping tools and face milling gutters

0__rgb_72_294_131_fitProportional.jpg


More and more face milling cutters and declamping tools are hydraulically clamped.
An implemented pressroom in the tool is put under pressure through grease or oil,
so that the tool as example is pressed onto the shaft of the machine.



This kind of tension enables transferring high torque
and therefore reaches an exact centrical tension.

0__rgb_72_74_73_fitProportional.jpg


Important Information

The temperature has a high influence on setting the pressure to the clamping unit
and on the choice of the high pressure one-hand pump.

If the temperature falls, pressure also drops, and vice versa. Differences in temperature of more than 30°C
will most probably require a further setting of the pressure to the clamping unit. Regular controls have to be done.

Character features of High Pressure One-hand Pump:

  • Ergonomic plastic handle for comfortable and simple handling
  • Controlled and accurate application, due to check valve, air bleed valve and pressure release valve
  • Generates high clamping force without ancillary power
  • Easy and clean disconnection of nipple due to pressure release valve and lubricant return flow to the cylinder
  • The pressure gauge serves as control tool for clamping or precise controlled pressure build-up for tool chucks



Contact
Merken